中文版 | Feedback

H45 Industrial Tubine

Dare:2018-11-23 13:48:16 Clicks:

H45 turbine is a double output shaft turbine, coupling of both sides of which can drive two sets of equipment (such as two water pumps), or drive water pump (fan, compressor) at one side and drive electromotor at the other, with three machine sets running together. The advantage of this mode is: it applies to occasions of great change of power load or instable steam system because when the inlet and outlet steam pressure of turbine fluctuates greatly, the electromotor will output or absorb changes of power. 

The operating of the three machine sets - turbine, electromotor and driven equipment (water pump, fan or compressor) -- can also apply to the following operational conditions: when the output power of turbine can not meet the normal operation of driven equipment due to insufficient inlet steam of turbine or limited thermal load of outlet steam, the turbine and electromotor will operate together to output power, thus meeting the normal operation of driven equipment (the insufficient power section will be supplemented by electromotor). Or, according to the operating mode of system thermal load and inlet steam, if the output power of turbine is surplus after meeting normal operation of driven equipment, the electromotor will absorb the surplus power, asynchronous motors generate asynchronously and the electricity will be transmitted to in-plant low voltage (or high voltage) power grid, thus reducing power consumption rate. In this way, steam will be used to the largest degree and the energy-saving effect will be more obvious. 

Model 

H45 Industrial Tubine

Speed range(r/min)

1500-3000

Power range (kw)

300-1800

Inlet steam pressure range (MPa)

0.3-1.6

Inlet steam temperature range(℃)

150-300

Exhaust steam pressure range (MPa)

0.15-0.6

Level

One double-column velocity-compounded stages

Inlet steam diameter(mm)

200-350

Exhaust steam diameter(mm)

350-500

Type of regulating system

Machinery hydraulics, electron regulation and electrohydraulic control

 

Technical specifications of the product

Type

 code

Rated power(kw) 

Speed(r/min) 

Inlet pressure(MPa) 

Inlet temperature(℃) 

Exhaust pressure(MPa) 

Steam rate(kg/kwh) 

B0.3-0.98/0.2

H45

300

3000

0.98

275

0.2

17.8

B0.35-0.98/0.2

H45

350

3000

0.98

280

0.2

19.4

B0.5-0.7/0.22

H45

500

1480

0.7

300

0.22

29.6

B0.63-0.8/0.3

H45

630

3000

0.8

270

0.3

19.88

B0.65-1.6/0.3

H45

650

3000

1.6

201

0.3

11.68

B1.0-0.98/0.49

H45

1000

3000

0.98

270

0.49

35.45

B1.5-1.6/0.2

H45

1500

3000

1.6

300

0.2

15.36

B1.6-0.98/0.25

H45

1600

3000

0.98

260

0.25

19.6

Note The pressure of feed and exhaust steam is absolute pressure The weight of turbines main body is 3.8T.